Moving a sub clip

Proceed as follows.

1 Press the SUBCLIP button, turning it on.

2 Press the THUMBNAIL button, turning it on.

Thumbnails of the sub clips within the current clip list appear.

To escape from the thumbnail display to the full- screen display

Press the THUMBNAIL button, turning it off.

3 Use the arrow buttons or jog dial to select the desired sub clip.

You can select sub clips with the following operations. Press the PREV or NEXT button: Move to the

previous or next sub clip.

Press the PREV or NEXT button with the SHIFT button held down: Move to the first or last sub clip.

Press the F or f button with the SHIFT button held down: Switch to the previous or next page.

4 Hold down the SHIFT button, and press the SET button.

The sub clip operation menu appears.

To return to the thumbnail display without moving the sub clip

Do either of the following.

Use the arrow buttons to select EXIT, and press the SET button.

Press the RESET button.

5 Use the arrow buttons to select MOVE, and press the SET button.

The sub clip movement screen appears. The sub clip selected in step 3 appears surrounded by a frame.

This shows that third sub clip is moved to the position of eighth sub clip.

Cursor showing the position to which the selected sub clip is moved

To escape from the sub clip movement screen to the previous screen

Press the RESET button.

6 Use the arrow buttons or the jog dial to move the cursor to the position where you want to move the selected sub clip.

Note

You can press the THUMBNAIL button to return to full-screen sub clip display, without moving a sub clip.

7 Press the SET button.

The sub clip thumbnail display appears, and you can check the new position of the sub clip.

Selection Scene 5 Chapter

5-2 Basic Operations 65