Total duration of the sub clips in the clip list

Cursor

(Insertion position for the next sub clip to be included)

Thumbnails of the sub clips already included in the clip list

To move the cursor within the scene selection window

When the scene selection window appears as you carry out step 3, use the left and right arrow buttons to move in the desired direction.

6 When you have added all of the desired clips, save the current clip list to disc.

For details, see 5-3-2 “Saving the Current Clip List to Disc” (page 67).

Note

Unless the current clip list has been saved to disc, its contents will be lost when a disc is ejected or the unit is powered off. After creating a clip list, be sure to save it.

Creating a sub clip from a full-screen display clip, and including it in the clip list (Quick scene selection)

To create any sub clip from a full-screen display clip, and include it in the clip list, proceed as follows.

1 With the SUBCLIP button off, and the clip shown in the full-screen display, carry out playback and search to find the point you want to be the IN point of the sub clip.

2 At the point you want to be the IN point of the sub clip, hold down the G/IN button and press the SET button.

This sets the IN point, and the IN indicator lights.

3 In the same way, find the point you want to be the OUT point of the sub clip, hold down the g/OUT button and press the SET button.

This sets the OUT point, and the OUT indicator lights.

When you set IN and OUT points across several clips

The number of sub clips created equals the number of clips from the IN point to the OUT point. (See following figure.)

Clips recorded on disc

 

Clip 1

Clip 2

Clip 3

 

 

 

 

 

IN point

 

OUT point

 

 

 

 

 

 

Sub clip 1

Sub clip 2

Sub clip 3

 

 

 

 

 

 

To check the duration

Press the G/IN button and g/OUT button together. The duration appears on the screen.

To reset the IN point or OUT point, hold down the G/IN button or the g/OUT button and press the RESET button.

4 Hold down the SHIFT button, and press the SET button.

This adds the segment from the IN point to the OUT point to the end of the clip list as a sub clip.

5 Repeat steps 1 to 4 until all required sub clips have been created and added to the clip list.

To preview a clip list while it is being created Press the SUBCLIP button, turning it on, and then press the PLAY button.

Playback begins from the first sub clip.

6 Save the current clip list to disc.

For details, see 5-3-2 “Saving the Current Clip List to Disc” (page 67).

Note

Unless the current clip list has been saved to disc, its contents will be lost when a disc is ejected or the unit

Selection Scene 5 Chapter

5-2 Basic Operations 63