Sony PDW-1500 manual 99

Menu items in the 700s, relating to video control

Item number	Item name		Settings
In 625-line	9 ... 22	LINE 9, 322 ... LINE	Specify blanking for lines 9, 322 to 22, 335.
mode		22, 335	blnk: Carry out blanking.
			thru: Switch off blanking.
	23	LINE 23	Specify blanking for line 23.
			half: Carry out half-blanking.
			thru: Switch off blanking.
705	EDGE SUBCARRIER REDUCER		Select whether to enable the edge subcarrier reducer (ESR).
	MODE		on: Enable.
			off: Do not enable.
			When playing back a composite signal, set this to “on.”
707	FORCED VERTICAL		The “Y-add” function is normally switched on automatically during jog or
	INTERPOLATION OFF		variable speed playback. This item selects whether or not to force the “Y-
			add” function off.
			auto: Automatically switch the “Y-add” function on.
			off: Force the “Y-add” function off.
			The “Y-add” function is a circuit operation to interpolate the video signal
			vertically during jog or variable speed playback for the purpose of reducing
			the vertical movement of the playback picture.
710	INTERNAL VIDEO SIGNAL		Select the test signal to be output from the internal test signal generator.
	GENERATOR		When SG is selected using the VIDEO INPUT SEL button, the internal test
			signal generator operates to output the selected test signal. This signal
			can also be recorded.
			BB: Black burst signal
			CB75: 75% color bar signal
			CB100: 100% color bar signal
			The default settings for each line mode are as follows:
			In 525(U)/525(J)-line modes: CB75
			In 625-line mode: CB100
713	VIDEO SETUP REFERENCE		Select whether to remove the setup (7.5%) from the input analog video
			signals and whether to add the setup (7.5%) to the output analog video
	Sub-item		signals (when 525(U) or 525(J)-line mode is selected).
	1	INPUT LEVEL	Whether to remove the setup from the input.
			0.0%: Do not remove.
			7.5%: Remove.
			The default settings for each line mode are as follows:
			525(U)-line mode: 7.5%
			525(J)-line mode: 0.0%
	2	OUTPUT LEVEL	Whether to add the setup to the output.
			0.0%: Do not add.
			7.5%: Add.
			The default settings for each line mode are as follows:
			525(U)-line mode: 7.5%
			525(J)-line mode: 0.0%
715	VIDEO GAIN CONTROL		Adjust the video output level.
			–512 to 0 to 511
716	CHROMA GAIN CONTROL		Adjust the chroma output level.
			–512 to 0 to 511
717	CHROMA PHASE CONTROL		Adjust the chroma phase.
			–128 to 0 to 127
718	SETUP LEVEL (525(U)/525(J)-line		Adjust the setup level (black level).
	modes)/BLACK LEVEL (625-line		–512 to 0 to 511
	mode)
719	SYSTEM PHASE SYNC		Adjust the output signal sync phase.
			–128 to 0 to 127
720	SYSTEM PHASE SC		Adjust the output signal subcarrier phase.
			0 to 511

Menus 8 Chapter

8-3 Extended Menu 99