Sony PDW-1500 manual 121

Message in time	Display	Description	Action
data display	condition a)
Disc Damage	off	A command was received to record,	This disc cannot be recorded. Exchange
		display an E-E picture, record an	the disc.
		essence mark, or add a quick scene
		selection sub clip when there was no
		free sparing area.
Non AV Full	off	A command was received to record,	Insert a different disc with enough free
		display an E-E picture, record an	capacity.
		essence mark, or add a quick scene
		selection sub clip when there was no
		free Non-Real-Time space.
No Clip!	limit	A playback or search command was	These operations are not possible.
		received for a disc containing no
		recorded clips.
Disc Top!	limit	A PREV or reverse high-speed search
		command was received with the disc
		stopped at the top.
Disc End!	limit	A NEXT or forward high-speed search
		command was received with the disc
		stopped at the end.
TC EXT!	on	A time code or user bits preset	Try the operation again after setting
		command was received with extended	extended menu item 626 “TC MODE” to
		menu item 626 “TC MODE” set to “ext	“int preset.”
		preset.”	See 8-3-2 “Extended Menu Operations”
REGEN mode!	on	A time code or user bits preset
			(page 102) about how to make this setting.
		command was received with extended
		menu item 626 “TC MODE” set to “int
		regen,” “ext regen,” or “rp188 regen.”
REC RUN!	on	A time code or user bits preset	Try the operation again after setting
		command was received with extended	extended menu item 627 “RUN MODE” to
		menu item 627 “RUN MODE” set to “rec	“free run.”
		run.”	See 8-3-2 “Extended Menu Operations”
			(page 102) about how to make this setting.
REC-PAUSE!	on	A time code or user bits preset	Try the operation again after stopping
		command was received with recording	recording.
		paused.
REC mode!	limit	A command to switch video or audio
		signals was received during recording.
REC mode!	limit	A command to switch audio channels
		was received during recording.
a) With respect to setting of basic menu item 016

During recording and editing operations

Message in time	Display	Description	Action
data display	condition a)
Disc Error!	off	Normal recording is not possible	Use another disc.
		because of a disc defect.	You can check the state of a disc by
			checking playback condition marks (see
			page 44).
525/60 sig!	limit	An NTSC signal was input with this unit	Input a PAL signal.
		in 625 line mode (PAL system).
625/50 sig!	limit	A PAL signal was input with this unit in	Input an NTSC signal.
		525(U) or 525(J) line mode (NTSC
		system).

Troubleshooting and Maintenance 9 Chapter

9-3 Alarms 121