Sony PDW-1500 5-3ClipList Operations, 5-3-1Displaying the CLIP Menu, 5-3-2Saving the Current Clip List to Disc, Saving edited clip lists to disc

To cancel the deletion, and escape from the sub clip deletion screen

Do either of the following.

•Use the left or right arrow button to select CANCEL, and press the SET button.

•Press the RESET button.

The screen returns to the sub clip thumbnail display.

3 Use the left or right arrow button to select OK, and press the SET button.

This deletes the sub clip, and the screen returns to the sub clip thumbnail display.

Saving edited clip lists to disc

The operations described above (moving, trimming, and deleting sub clips) are carried out on the current clip list. Execute the procedure in 5-3-2 “Saving the Current Clip List to Disc” (page 67) to save the current clip list to disc again as a clip list.

Note

Unless the current clip list has been saved to disc, its contents will be lost when a disc is ejected or the unit is powered off. After creating a clip list, be sure to save it.

5-3Clip List Operations

5-3-1 Displaying the CLIP Menu

Proceed as follows.

Notes

•The CLIP menu can handle up to 99 clip lists.

•Do this operation in stop mode.

With the THUMBNAIL button off, hold down the SHIFT button and press the SUBCLIP button.

The CLIP menu appears.

CLIP MENU

LOAD

SAVE

DELETE

CLEAR

TC PRESET

Use this menu to carry out the following operations.

•Save the current clip list to disc.

•Load a clip list on disc into the current clip list.

•Delete a clip list from disc.

•Clear the current clip list.

•Set the start timecode of the current clip list.

5-3-2 Saving the Current Clip List to Disc

Proceed as follows.

1 In the CLIP menu, use the up and down arrow buttons to move the cursor to SAVE and press the right arrow button.

A list of clip lists appears.

“NEW FILE” is shown for lists which do not exist on the disc, having names only.

The date of creation or the title of each clip list is shown in the list of clip lists. (The date of creation is always shown for clip lists without titles.)

To switch between the date and the title Hold down the SHIFT button and press the SET button.

Selection Scene 5 Chapter

5-3 Clip List Operations 67