Menu Configuration and Basic Menu Operations
The
When the selected menu is composed of multiple pages
With the menu that is composed of multiple pages such as Paint menu, press v or V to flip the pages.
See “Initial display (Paint menu)” on the next page.
Basic Operating Procedure
1
PAINT 1 PAINT 2 PAINT 3 SCENE OTHERS FUNCTION MONITOR
MENU
2
MONITOR
BRIGHTCONTRAST
3
1 To display a menu, press and light one of the MENU buttons.
The menu operation mode is initiated and the menu for the pressed button appears on the display. PAINT 1/2/3: Paint menu
SCENE: Scene file operation menu
OTHERS: OTHERS menu
FUNCTION: Function menu
Note
The menu items to be displayed depends on the connected camera.
2 Select the item to be adjusted.
Press the button that shows the name of the item on the menu to obtain the corresponding adjustment display or operation area.
When a submenu is shown
Press the desired submenu item to change the display.
See “Submenu” on page 17.
3 Set or adjust the item (parameters).
•Turn the control knobs (or press the button) to adjust (or set) the corresponding item (parameters) to the desired values.
See “Adjustment display” on page 17.
•When a message is displayed, follow the instruction and press [OK].
When the adjustment is finished
•To adjust another item of the same menu, press the names of that item.
•To adjust items of another menu, press the corresponding MENU button.
•To release the menu operation mode, press the lit MENU button.
•You may select Function menu without exiting the currently selected menu. When you exit Function menu by either of the following methods, the previous menu is restored.
–Press the lit FUNCTION button so that it goes dark.
–Press the lit MENU button for the previous menu.
To monitor the camera picture
Press the MONITOR button.
The picture from the connected camera is displayed on the LCD.
With a
15