File Operations

Transferring Scene Files between the Camera and a Memory Stick (with the DXC-D50 Series)

When a DXC-D50-series camera is connected, the registered scene files can be stored as a data block and can be read when required.

Storing the scene files on a Memory Stick

Proceed as follows:

1 Insert the Memory Stick (see page 59).

2 Press the OTHERS button in the Menu operation block so that the OTHERS menu is displayed on the LCD, then press [RCP Config] to call the RCP Config menu.

3 Set the menu to Advanced Setting mode.

1)Press [Security] on the RCP Config menu.

2)Press and highlight [Engineer Mode].

The [Status], [Menu Set], and [Code No.] buttons are displayed.

3)Press [Status].

The Security Status menu appears.

4)Press [Advance Mode].

4 Return to the OTHERS menu, and press [File]. 5 Press [File Trans].

The Scene File Transfer display appears.

6 Press [CAM -> MS].

A confirmation display appears.

7 Press [Start].

The registered scene files are transferred to the Memory Stick.

When the transfer is finished

The termination message “COMPLETED” appears.

Reading the scene files from a Memory Stick

Proceed as follows:

1 Insert the Memory Stick (see page 59).

2 Operate in the same manner as when you stored the files until the Scene File Transfer display appears.

3 Press [MS -> CAM].

A confirmation display appears.

4 Press [Start].

The scene files are transferred from the Memory Stick to the connected camera.

When the transfer is finished

The termination message “COMPLETED” appears.

54