0PANEL ACTIVE button

Press and light up the button to permit this panel to control the camera system (Panel active status). The IRIS/M.BLACK ACTIVE button of the iris/ master black control block also lights.

If you press this button so that it goes dark, the panel will be locked, preventing accidental misoperation. If Panel Active Lock with a security code has been enabled, the PANEL ACTIVE and the IRIS/ M.BLACK ACTIVE buttons are locked by pressing the PANEL ACTIVE button for more than 2 seconds in Panel active status.

For details on Panel Active Lock, see “Specifying the Security Codes” on page 49.

qa ASSIGN button

Various functions can be assigned to this button using “SW Setting” of the RCP Config menu (No function is assigned at the factory).

To assign a function, see “Assigning a Function to the ASSIGN Button” on page 48.

qs Power and output select buttons

A B C

CAM PW

BARS CLOSE

ACAM PW (camera power) button

When the unit is connected to the CCU-TX7, you can turn the power supply to the video camera ON by pressing and lighting up this button. (The button promptly flashes until the camera becomes ready for transmission.)

When you press this button again, it starts flashing and the power supply is turned off.

BBARS (color-bar signal) button

Press and light up this button to activate the color-bar signal generator of the video camera and send the respective the color-bar signal. When you press this button again, the button goes dark and the camera picture is displayed.

CCLOSE button

Press and light the button to close the iris. To release the close mode, press the button again so that it goes dark.

The close mode is also released when you press the STANDARD or IRIS/M.BLACK LINK button, or operate a scene file.

qd AUTO SETUP buttons

A B C D

AUTO SETUP

SKIN DTL LEVEL START

WHITE BLACK

SET UP

 

AAuto adjustment item select buttons

Press and light up these buttons to select the items to be automatically adjusted.

SKIN DTL SETUP: Skin detail

LEVEL: Gamma balance, knee point, master black level, etc.

For details on the Skin detail setup, see “Skin Detail Correction/Skin Matrix Adjustment (for DXC-D30/D35/D50 Series Only)” on page 56.

BSTART button

Press to start automatic adjustment of the selected items.

The button lights during adjustment and goes dark when adjustment is completed.

CWHITE (white balance) button

Press to automatically adjust the white balance. The button lights during adjustment and goes dark when adjustment is completed.

DBLACK (black balance) button

Press to automatically adjust the black balance and black set.

The button lights during adjustment and goes dark when adjustment is completed.

Note

If an error occurs during adjustment, the pressed button flashes.

7