When you do not select any menu or the signal from the camera, the LCD shows the following status display:
On the status display, the set value of each item is only displayed. The setting is made with the Function menu or with the corresponding knob on the operation panel.
The set values of the shutter and master gain are displayed. You may adjust these items using the Function menu.
Status
The ND filter number being selected on the camera is displayed.
Shutter | M. Gain | Filter |
60 | 12dB | 1 |
When you select a scene file, | Scene File : 2 |
|
|
the filename is displayed. | White | Gamma | Detail |
0 | 0 | 0 | 0 |
| Black |
| Iris |
0 | 0 | 0 | 2 |
You may adjust these items using the
WHITE, MASTER GAMMA, BLACK/ FLARE, and DETAIL knobs, and IRIS control (or IRIS lever).
The “Black” columns can be changed to “Flare” using the OTHERS menu.
When you press and light the PAINT 1 (or PAINT 2, PAINT 3) button of the menu operation block, the initial display of the Paint menu is obtained.
To clear the adjusted values
The names of the items are displayed. Press the name of the item to be adjusted.
The color of the pressed name area will change, and the lower half of the panel will become the adjustment display (see the next page).
|
|
| Current page number / total number of pages | |
Clear |
|
| 1 / 5 | Press either to flip the pages of the |
White | Black | Flare | Gamma | menu. |
/Knee |
| |||
|
|
|
|
16