Initial Settings
4 To set the date:
1)Press and light [Date].
Date Time Setting
2001/11/17
(Sat)
22 : 12 : 31
Exit
Adjusting the Buzzer Sound
A buzzer sounds on the
To adjust the buzzer, proceed as follows:
Date | Time | Set | Cancel |
Year Month Day
2001 8 8
2)Set the Year, Month and Day with the left three control knobs.
3)Press [Set].
The set date becomes valid.
To restore the previous setting, press [Cancel] instead of [Set].
1 Press [RCP Adjusting] on the RCP Config menu.
The RCP adjustment menu appears.
Clear | Exit |
Buzzer LED
Volume Bright
5 To set the time:
1)Press and light [Time].
Date Time Setting
2001/11/17
(Sat)
22 : 12 : 31
Exit
2 Press and light [Buzzer Volume].
The lower half of the display becomes the Buzzer Volume adjustment display.
Clear | Exit |
Buzzer | LED |
Volume | Bright |
Date | Time | Set | Cancel |
Hour Minute Second
17 32 25
2)Set the Hour, Minute and Second with the left three control knobs.
3)Press [Set] in synchronization with a time signal.
The set time becomes valid.
To resume the previous setting, press [Cancel] instead of [Set].
When the clock setting is completed
Press [Exit] to leave the menu.
| Buzzer |
| |
| Volume |
| |
Call | Touch | SW | All |
Buzzer | Click | Click | Off |
Call | Touch | Switch | Master |
50 50 50 50
3 Adjust the levels with the corresponding control knobs (50 is the standard value with all items). Call: Sound volume of the buzzer when a call
signal is received
Touch: Sound volume of the buzzer when a button displayed on the menu display is operated
Switch: Sound volume of the buzzer when a button on the panel is operated
The master volume can be adjusted with the rightmost control knob (Master).
46