Sony RCP-D50/D51 [Monitor Select], Scene File operation menu display, Monitor output set display (Expansion menu)

Monitor output set display (Expansion menu)

When you press [Monitor Select] on an adjustment display of the Paint menu, the upper half of the panel becomes the monitor output setting display.

							When the CCU-TX7 is connected, you
							can select the WF/PIX output signals.
							R/G/B: To independently select the R,
			Monitor Select				G, or B signal.
	R	G	B	RGB	SEQ	ENC	RGB: To select the R, G, and B signals
							in combination.
Press again to return to	Monitor						SEQ: Only the WF output is enabled,
	Select
the previous display.							and you can monitor the waveforms of

the R, G, and B signals in sequence.

ENC (encode): The encoded signal is output.

Scene File operation menu display

When you press and light the SCENE button of the menu operation block, the Scene File operation menu display is obtained.

Scene file recall buttons: Buttons 1 to 20 can be displayed by pressing v or V, or turning the leftmost (Page) control knob.

File list

Scene Files Store Scene file store button

1	2	3	4	5
Scene 1 : STUDIO1				Scene :	2*	Filename box:
Scene 2 : DXC-D30				DXC_D
Scene 3 : TEST 002						Enter a filename using the
Scene 4 :						second (Char) from the right and
Scene 5 :						the rightmost (Cur) control knob.
Page
				Char	Cur

For details on the scene file operations, see page 53.

19