When you select an item on the initial display of the Paint menu, the lower half of the panel becomes the adjustment display for the selected item.
Example: when you select “White” from the PAINT 1 initial display with the
When you press this, the upper half of the panel becomes the monitor output setting display 
(see page 19).
The adjustment parameters for the selected item and their 
adjustment values are displayed.
You may adjust these items using the corresponding control knobs.
If you press a value area after pressing [Clear], that adjustment value is initialized to standard.
Clear |
| 1 / 5 |
|
White | Black | Flare Gamma |
|
|
| /Knee |
|
Monitor |
| White |
|
Select |
|
|
|
Preset | Memory | Memory | ATW |
AB
RB
0 0
The name of the item selected on the initial display is displayed.
If you press this area after pressing [Clear], all the adjustment values for the selected item are initialized to standard.
When there are any ON/OFF functions related to the adjustment, the names of the functions are displayed on this line.
If the selected item has many parameters, a submenu is displayed.
Example: when you select “Skin Detail” from the PAINT 2 initial display (Advance mode) with the
Clear |
| 2 / 5 |
|
| |
Detail | Skin | Black |
| Detail | Gamma |
WF/PIX | Detail 1 |
|
Select |
|
|
Submenu | 1 | 2 |
Level | H/V Ratio Frequency |
0 0 0
Press to switch the parameters.
WF/PIX | Detail 2 |
Select |
|
1 2
Crispening Level Dep
0 0
17