Menu Configuration and Basic Menu Operations

Page

Menu

Submenu

Control item

Function

 

 

 

 

 

Paint 2

Detail

Detail 1

• Level

To adjust the detail (contour correction) level

 

 

 

 

 

 

 

 

• H/V Ratio

To adjust the ratio of V (vertical) detail to H (horizontal) detail in

 

 

 

 

detail correction. As the value becomes larger, the V detail ratio

 

 

 

 

increases.

 

 

 

 

 

 

 

 

• Frequency

To adjust the boost frequency (thickness of contour lines) for the

 

 

 

 

detail correction

 

 

 

 

 

 

 

 

• V-Limit

To adjust the limit value for vertical detail

 

 

 

 

 

 

 

Detail 2

• Crispening

To adjust the crispening level (appropriate level at which details of

 

 

 

 

noise signals are removed)

 

 

 

• Level Dep

To adjust the level dependence (level at which the detail signal starts

 

 

 

 

being suppressed)

 

 

 

• High L.

To adjust the amount of suppression of highlight detail (detail added

 

 

 

 

to a high-luminance area)

 

 

 

• AFT GAM

To adjust the amount of detail added after gamma correction

 

 

Detail 3

Aperture

To turn the aperture correction ON/OFF

 

 

 

Knee Apert

To turn ON/OFF the detail correction to the level higher than the

 

 

 

 

knee point

 

 

 

• Aperture

To adjust the amount of aperture correction

 

 

 

• Knee Apert

To adjust the amount of detail correction to the level higher than the

 

 

 

 

knee point

 

Cross Color

 

Comb Filter R

To turn the red comb filter in the detail circuit ON/OFF. If OFF is

 

 

 

 

selected, clarity improves, but cross color increases.

 

 

 

Comb Filter G

To turn the green comb filter in the detail circuit ON/OFF. If OFF is

 

 

 

 

selected, clarity improves, but cross color increases.

 

 

 

• CCS Level

To adjust the cross color suppress level to suppress the phenomenon

 

 

 

 

of color jittering or coloring when a minutely striped pattern is shot

 

Skin Detail

Skin Detail 1

Detail Gate

To turn ON/OFF the skin gate area (target color range of skin detail

 

 

 

 

correction or skin matrix adjustment)

 

 

 

 

 

 

 

 

Skin DTL

To turn the skin detail function (which suppresses the contour

 

 

 

 

correction in the selected area) ON/OFF

 

 

 

 

 

 

 

 

Auto Skin

The unit will go to Standby mode when this button is pressed, and

 

 

 

 

will automatically start obtaining the skin gate area data when Start

 

 

 

 

is pressed.

 

 

 

 

 

 

 

 

• Level

To adjust the amount of skin detail correction. As the value becomes

 

 

 

 

larger, the amount of detail in the skin gate area decreases.

 

 

 

 

 

 

 

 

• Size

To adjust the R–Y and B–Y ranges of the skin gate area (for setting

 

 

 

 

each range to the same value at the same time)

 

 

 

 

 

 

 

 

• R-Y

To adjust the R–Y range of the skin gate area

 

 

 

 

 

 

 

 

• B-Y

To adjust the B–Y range of the skin gate area

 

 

 

 

 

 

 

Skin Detail 2

Skin Gate

To turn the display of skin gate area ON/OFF

 

 

 

Skin DTL

To turn the skin detail function ON/OFF

 

 

 

Auto Skin

The unit will go to Standby mode when this button is pressed, and

 

 

 

 

will automatically start obtaining the skin gate area data when Start

 

 

 

 

is pressed.

 

 

 

• Level

To adjust the skin detail level

 

 

 

• Posi

To adjust the R–Y and B–Y position of the skin detail gate area (for

 

 

 

 

setting each range to the same value at the same time)

 

 

 

• R-Y

To adjust the R–Y position of the skin detail gate area

 

 

 

• B-Y

To adjust the B–Y position of the skin detail gate area

 

 

 

 

 

28