Sony SA-N11 manual Setting up, Chapter, Connecting the Flat Cord, Connecting the Right Speaker

Chapter 1:

Setting up

Connecting the Stereo

Inserting the batteries

Setting the Clock

Connecting the

Stereo

Use the illustrations below to connect your stereo.

STEP 1 Connecting the

Flat Cord

(For only the customers using the TC-TX1 stereo cassette deck)

Connect the tuner CD player and the stereo cassette deck with the flat cord (supplied) pushing in the connector until it clicks.

STEP 2 Connecting the

Right Speaker

Connect the right speaker to the tuner CD player with the audio cord (supplied) and the mains lead.

Connecting the audio cord

Connect firmly the white plug to the white

(L) jack and the red plug to the red (R) jack.

White

Red

GB

4

To disconnect the flat cord

Pull out the connector of the flat cord while pressing its sides. Do not pull the flat cord itself.

Connecting the mains lead of the right speaker

Connect the mains lead of the right speaker to AC OUTLET on the rear panel of the tuner CD player.

Notes

The illustrations on page 5 shows the SA-N1 use active speaker system.

The rear view of the SA-N11 differs from the illustration.

STEP 3 Connecting the

Left Speaker

Connect the left speaker to the right speaker with the speaker cable (supplied). Be sure to keep the speaker cable away from the aerials.

Grey cord to ](red)

Twist each tip

Black-lined cord to } (black)

]

}

Chapter 1: Setting up