Mixing
1.Open the Voiceover.pca and Drumhit.pca audio files.
2.Select all audio data in the Drumhit data window.
3.Drag the selection to the Voiceover data window.
•A shaded region representing the source selection appears in the destination window.
•An “M” appears in the box adjacent to the pointer.
Tip: When dragging a selection to paste sound data, drag up or down before moving the mouse left or right. Dragging left or right before moving the mouse vertically adjusts the selection length.
4.Position the leading edge of the shaded region in the Voiceover data window where the mixing of the selection will begin.
5.Release the mouse button. The Mix/Replace dialog appears.
6.Verify that both Volume levels are set to 0 dB and click OK.
Selection is mixed into the destination window
Creating CD tracks
You can create CD tracks by dragging selections or files from the Explorer window to a data window. For more information, see Adding files to a data window and creating tracks on page 294.
Toggling the Mix, Paste, and CD Track functions
An alternate way of specifying a mix, paste, or CD track is the mouse toggle method.
1.Open the Voiceover.pca and Drumhit.pca files.
2.Select all audio data in the Drumhit data window.
3.Drag the selection to the Voiceover data window. A shaded region representing the source selection appears in the destination window and a letter or CD icon appears in the box adjacent to the pointer.
Tip: When dragging a selection to paste sound data, drag up or down before moving the mouse left or right. Dragging left or right before moving the mouse vertically adjusts the selection length.
152 CHAPTER 9