Crossfading events

You can crossfade between two events on the same channel. Crossfading fades out one event’s volume while another event’s volume fades in.

Fade in volume line

Fade out volume line

Note: You can show or hide the crossfade length ToolTip by selecting Event and then Show Crossfade Lengths from the Options menu or pressing Ctrl+Shift+T.

Using automatic crossfades

The automatic crossfades features turns the overlapping portions of two events into a crossfade. From the Options menu, choose Event, and then choose Automatic Crossfades or press Ctrl+Shift+X to turn automatic crossfades on and off.

Events before crossfade

Events after crossfade

Drag one event to overlap the other.

When Automatic Crossfades is turned off, overlapping events punch in and out with no fades.

Manually setting a crossfade

An automatic crossfade is not inserted if a shorter event is placed within the same time frame of a longer event. In this case, the longer event begins playing, then the shorter event plays (punch in), and then the longer event resumes playing. You can manually create a crossfade to fade in or out of the shorter event.

This is a fast and effective method of inserting a voiceover on top of background music (although the music fades out completely) or to replace a bad section of audio.

1.Place the mouse pointer on one of the shorter event’s handles. The fade cursor () appears.

2.Drag the handle to the desired position.

Events without crossfade

Events with manual crossfade

USING THE EVENT TOOL 165