![](/images/new-backgrounds/1304354/30435425x1.webp)
2.1.10 MASTER VOLUME DOWN : 0x43 0x4C 0x56 0x2D (‘CLV-’)
This command is used to turn down the master volume.
When this command is transmitted, the volume level decreases continuously. When the MASTER VOLUME STOP command (page 13) is transmitted, the volume level stops decreasing.
To read the control status of the MASTER VOLUME motor from the
To read the master volume level setting from the
Packet format
0x43 0x4C 0x56 0x2D “parameter” 0x0D
♦Parameter
The parameter consists of 1 byte of data.
Be sure to use 0x40(‘@’) for this parameter.
Example
To turn down the master volume: 0x43 0x4C 0x56 0x2D 0x40 0x0D (‘C L V - @ CR’)
2.1.11 MASTER VOLUME STOP : 0x43 0x4C 0x56 0x53 (‘CLVS’)
This command is used to stop the increase or decrease in the master volume caused by the MASTER VOLUME UP or MASTER VOLUME DOWN command.
To read the control status of the MASTER VOLUME motor from the
To read the master volume level setting from the
Packet format
0x43 0x4C 0x56 0x53 “parameter” 0x0D
♦Parameter
The parameter consists of 1 byte of data.
Be sure to use 0x40(‘@’) for this parameter.
Example
To stop the increase or decrease in the master volume: 0x43 0x4C 0x56 0x53 0x40 0x0D
(‘C L V S @ CR’)
Page 13/43