Scene Recall 0x43 0x52 0x43 0x4C ‘CRCL’ | Sony SRP-X500P specs

SRP-X500P RS-232C Interface Manual

•PROJECTOR ON/STANDBY INDICATOR (1st byte)

Shows the status of the PROJECTOR ON/STANDBY POWER switch.

The parameter and the status of the PROJECTOR ON/STANDBY POWER switch are as shown in the following table.

PROJECTOR ON/STANDBY INDICATOR

STANDBY (The switch lights up red.)	0x30 (‘0’)
ON (The switch lights up red.)	0x31 (‘1’)
Cool off before entering STANDBY (the switch flashes green.)	0x32 (‘2’)

Example

When the projector is cooling off before entering standby (the switch flashes green) 0x41 0x32 0x0D

(‘A 2 CR’)

2.1.16 SCENE RECALL : 0x43 0x52 0x43 0x4C (‘CRCL’)

This command is used to recall a scene.

Note

This command can be used only when the SYSTEM TYPE selector on the SRP-X500P is set to 0.

Packet format

0x43 0x52 0x43 0x4C “parameter” 0x0D

♦Parameter

The parameter consists of 1 byte of data.

Byte	Parameter
1st	SCENE RECALL REQUEST

•SCENE RECALL REQUEST (1st byte)

Specify the scene number to be recalled.

SCENE RECALL REQUEST
1	0x31 (‘1’)
2	0x32 (‘2’)
3	0x33 (‘3’)
4	0x34 (‘4’)
5	0x35 (‘5’)
6	0x36 (‘6’)
7	0x37 (‘7’)
8	0x38 (‘8’)

Example

To recall scene No,7:

0x43 0x52 0x43 0x4C 0x37 0x0D (‘C R C L 7 CR’)

Page 18/43

Image 18

Sony SRP-X500P Scene Recall 0x43 0x52 0x43 0x4C ‘CRCL’, Projector ON/STANDBY Indicator 1st byte, Scene Recall Request

Contents

SRP-X500P Table of Contents Connecting the SRP-X500P to a Computer About This Manual3 4 RS-232C indicator Communication FormatCommunication Protocol Handshake Codes Communication Packet Format Basic Control Commands 1 AV/RGB Input Select 0x43 0x53 0x45 0x4C ‘CSEL’ Input Fader 0x43 0x50 0x4D 0x35 ‘CPM5’ Return packet format Input Fader Request 0x52 0x50 0x4D 0x35 ‘RPM5’ Fader 1st-6th byte Output Fader 0x43 0x50 0x4D 0x40 ‘CPM@’ Output Fader Request 0x52 0x50 0x4D 0x40 ‘RPM@’Fader 1st-8th byte Remote 1-6 Level 0x43 0x4C 0x56 0x4C ‘CLVL’ Channel 1st byteRemote Level 2nd byte Master Volume UP 0x43 0x4C 0x56 0x2B ‘CLV+’ Master Volume Level 1st byteRemote 1-6 Level 2nd-7th byte Master Volume Down 0x43 0x4C 0x56 0x2D ‘CLV-’ Master Volume Stop 0x43 0x4C 0x56 0x53 ‘CLVS’ Muting 0x43 0x4D 0x55 0x54 ‘CMUT’ Muting 2nd byte Muting Parameter Request 0x52 0x4D 0x55 0x54 ‘RMUT’ Input Muting 1st byteSpeaker Output Muting 2nd byte Remote Muting 5th byte Line Output Muting 3rd byteMaster Muting 4th byte Master Projector ON/STANDBY 0x43 0x50 0x4A 0x50 ‘CPJP’ Projector Control Request 1st byte Scene Recall Request 1st byte Projector ON/STANDBY Indicator 1st byteScene Recall 0x43 0x52 0x43 0x4C ‘CRCL’ Scene Recall Request Scene Recall Parameter Request 0x52 0x52 0x43 0x4C ‘RRCL’ Scene No st byte Status Acquisition Commands Index Request 0x52 0x50 0x4D 0x44 ‘RPMD’Index Level Meter Parameter Request 0x52 0x4D 0x54 0x52 ‘RMTR’ Level Meter 1st-16th byte To acquire status of single item To acquire the status of all items Parameters Input Volume 3rd-8th byte Master Volume Level 9th byteRemote 1-6 Level 10th-15th byte Input Level 16th-21st byte Output Level 22nd-29th byteInput Muting 30th byte Line Output Muting Output Muting 31st and 32nd byteSpeaker Output Muting Master Muting 33rd byte +48V Switch 38th byte RF/AF Indicator 36th byteWL Indicator 37th byte MIC 1-4 Trim 39th-42nd byte REF Indicator 49th byte Line Trim 43rd byteAV/RGB Trim 44th-48th byte FR Setup Status 54th and 55th byte Setup ChannelFR 50th-53rd byte Speaker Output Level 57th, 58th byte Setup StatusAV/RGB Input Select 56th byte Speaker Output CH1/2 Level Level Meter 60th-75th byte IR Output Mode Indicator 59th byteClip Indicator 77th byte Protection 76th byte Projector ON/STANDBY Indicator 80th byte Temperature 78th and 79th byteTemperature EMG Muting 83rd byte Level Scene No th byteParallel Input 85th-94th byte Parallel Output 95th and 96th byte FAN Motor 97th byte Master Volume Control 98th byteOutput OUT6 OUT5 OUT4 OUT3 OUT2 Gain Reduction 99th-108th byte AGC Gain Control Compressor Gain Reduction Information Request 0x52 0x50 0x4D 0x45 ‘RPME’ Maintenance Information CommandsInformation SETUPDATE2005/01/23 Information Maintenance Information Read Write Maintenance Information Read Write Maintenance Information Read only Maintenance Information Read only Version Request 0x52 0x56 0x45 0x52 ‘RVER’ VersionVersion Factory Preset 0x43 0x52 0x53 0x54 ‘CRST’