Sony SRP-X500P manual Table of Contents

SRP-X500P RS-232C Interface Manual

Table of Contents

1.	OVERVIEW		3
1.1	ABOUT THIS MANUAL		3
1.2	CONNECTING THE SRP-X500PTO A COMPUTER		3
1.3	COMMUNICATION FORMAT		4
1.4	COMMUNICATION PROTOCOL		4
1.5	RS-232CINDICATOR		4
1.6	NOTE ON VALUE SETTINGS		4
1.7	HANDSHAKE CODES		5
1.8	COMMUNICATION PACKET FORMAT		5
2.	COMMAND REFERENCE		6
2.1	BASIC CONTROL COMMANDS		6
	2.1.1	AV/RGB INPUT SELECT	6
	2.1.2	AV/RGB INPUT SELECT PARAMETER REQUEST	6
	2.1.3	INPUT FADER	7
	2.1.4	INPUT FADER REQUEST	8
	2.1.5	OUTPUT FADER	9
	2.1.6	OUTPUT FADER REQUEST	9
	2.1.7	REMOTE 1-6 LEVEL	10
	2.1.8	REMOTE FADER LEVEL PARAMETER REQUEST	11
	2.1.9	MASTER VOLUME UP	12
	2.1.10	MASTER VOLUME DOWN	13
	2.1.11	MASTER VOLUME STOP	13
	2.1.12	MUTING	14
	2.1.13	MUTING PARAMETER REQUEST	15
	2.1.14	PROJECTOR ON/STANDBY	17
	2.1.15	PROJECTOR ON/STANDBY PARAMETER REQUEST	17
	2.1.16	SCENE RECALL	18
	2.1.17	SCENE RECALL PARAMETER REQUEST	19
2.2	STATUS ACQUISITION COMMANDS		20
	2.2.1	INDEX REQUEST	20
	2.2.2	LEVEL METER PARAMETER REQUEST	21
	2.2.3	STATUS REQUEST	23
2.3	MAINTENANCE INFORMATION COMMANDS		39
	2.3.1	INFORMATION REQUEST	39
	2.3.2	MAINTENANCE INFORMATION READ WRITE	40
	2.3.3	MAINTENANCE INFORMATION READ WRITE REQUEST	41
	2.3.4	MAINTENANCE INFORMATION READ ONLY REQUEST	41
	2.3.5	VERSION REQUEST	42
	2.3.6	FACTORY PRESET	43

Page 2/43