Sony SRP-X500P manual Gain Reduction 99th-108th byte, AGC Gain Control

SRP-X500P RS-232C Interface Manual

♦GAIN REDUCTION (99th-108th byte)

The GAIN REDUCTION parameter consists of the 8 bytes of data in the order shown in the following table.

Byte	Parameter
1st	(RESERVED)
2nd	MIC AGC GAIN REDUCTION
3rd	SPEAKER OUTPUT 1 COMPRESSOR GAIN REDUCTION
4th	SPEAKER OUTPUT 2 COMPRESSOR GAIN REDUCTION
5th	SPEAKER OUTPUT 3 COMPRESSOR GAIN REDUCTION
6th	SPEAKER OUTPUT 4 COMPRESSOR GAIN REDUCTION
7th	LINE OUTPUT 1 COMPRESSOR GAIN REDUCTION
8th	LINE OUTPUT 2 COMPRESSOR GAIN REDUCTION
9th	LINE OUTPUT 3 COMPRESSOR GAIN REDUCTION
10th	LINE OUTPUT 4 COMPRESSOR GAIN REDUCTION

•AGC GAIN CONTROL

Indicates the gain reduction level reading of the AGC (in dB units).

The parameter and the gain reduction level reading are shown in the following table.

GAIN

CONTROL

Less than -30	0x30 (‘0’)
-30	0x31 (‘1’)
-29	0x32 (‘2’)
-28	0x33 (‘3’)
-27	0x34 (‘4’)
-26	0x35 (‘5’)
-25	0x36 (‘6’)
-24	0x37 (‘7’)
-23	0x38 (‘8’)
-22	0x39 (‘9’)
-21	0x3A (‘:’)
-20	0x3B (‘;’)
-19	0x3C (‘<‘)
-18	0x3D (‘=‘)
-17	0x3E (‘>‘)
-16	0x3F (‘?’)

GAIN

CONTROL

-15	0x40	(‘@’)
-14	0x41	(‘A’)
-13	0x42	(‘B’)
-12	0x43	(‘C’)
-11	0x44	(‘D’)
-10	0x45	(‘E’)
-9	0x46	(‘F’)
-8	0x47	(‘G’)
-7	0x48	(‘H’)
-6	0x49	(‘I’)
-5	0x4A (‘J’)
-4	0x4B (‘K’)
-3	0x4C (‘L’)
-2	0x4D (‘M’)
-1	0x4E (‘N’)
0	0x4F (‘O’)

GAIN
CONTROL
+1	0x50	(‘P’)
+2	0x51	(‘Q’)
+3	0x52	(‘R’)
+4	0x53	(‘S’)
+5	0x54	(‘T’)
+6	0x55	(‘U’)
+7	0x56	(‘V’)
+8	0x57	(‘W’)
+9	0x58	(‘X’)
+10	0x59	(‘Y’)

Page 37/43