♦FR (50th-53rd byte)
The FR parameter consists of the 4 bytes of data in the order shown in the following table.
Byte | Parameter |
1st | MIC 1/WL 1 FR |
2nd | MIC 2/WL 2 FR |
3rd | MIC 3 FR |
4th | MIC 4 FR |
•FR
Shows the status of the FEED BACK REDUCER. The correspondence of the parameter with the FEED BACK REDUCER setting is shown in the following table.
FR
Turned off | 0x30 (‘0’) |
Turned on | 0x31 (‘1’) |
Setting up in progress | 0x32 (‘2’) |
Cancellation in progress | 0x33 (‘3’) |
♦FR SETUP STATUS (54th and 55th byte)
The FEED BACK REDUCER setup status parameter consists of the 2 bytes of data in the order shown in the following table.
Byte | Parameter |
1st | SETUP CHANNEL |
2nd | SETUP STATUS |
•SETUP CHANNEL
Shows the channel for which the FEED BACK REDUCER setting is in progress.
The parameter and the channel are shown in the following table.
Channel
Normal operation | 0x30 (‘0’) |
MIC 1/WL 1 | 0x31 (‘1’) |
MIC 2/WL 2 | 0x32 (‘2’) |
MIC 3 | 0x33 (‘3’) |
MIC 4 | 0x34 (‘4’) |
CANCEL | 0x35 (‘5’) |
Page 31/43