•SETUP STATUS
Shows the progress of the FEED BACK REDUCER setting.
The parameter and the progress are as shown in the following table.
Progress
Stopped (finished) | 0x30 (‘0’) |
1 | 0x31 (‘1’) |
2 | 0x32 (‘2’) |
3 | 0x33 (‘3’) |
4 | 0x34 (‘4’) |
5 | 0x35 (‘5’) |
6 | 0x36 (‘6’) |
7 | 0x37 (‘7’) |
8 | 0x38 (‘8’) |
9 | 0x39 (‘9’) |
10 | 0x3A (‘:’) |
11 | 0x3B (‘;’) |
12 | 0x3C (‘<‘) |
13 | 0x3D (‘=‘) |
14 | 0x3E (‘>‘) |
15 | 0x3F (‘?’) |
♦AV/RGB INPUT SELECT (56th byte)
Shows the selection of the channel input from among the AV/RGB INPUT connectors. The parameter and the channel are shown in the following table.
Channel
OFF (All the AV RGB SELECT buttons are turned off.) | 0x30 (‘0’) |
A (The AV RGB SELECT A button lights up.) | 0x31 (‘1’) |
B (The AV RGB SELECT B button lights up.) | 0x32 (‘2’) |
C (The AV RGB SELECT C button lights up.) | 0x33 (‘3’) |
D (The AV RGB SELECT D button lights up.) | 0x34 (‘4’) |
E (The AV RGB SELECT E button lights up.) | 0x35 (‘5’) |
♦SPEAKER OUTPUT LEVEL (57th, 58th byte)
Shows the level of the SPEAKER OUT controls on the front panel of the
The SPEAKER OUTPUT LEVEL parameter consists of the 2 bytes of data in the order shown in the following table.
Byte | Parameter |
1st | SPEAKER OUTPUT CH1/2 LEVEL |
2nd | SPEAKER OUTPUT CH3/4 LEVEL |
The correspondence of the parameter with the speaker output level is the same as that of the LEVEL parameter of the REMOTE
Page 32/43
