Chapter 2 Preparations
Unsuitable Conditions
Do not use the projector under the following conditions.
Laying the unit on its side or upside down
Tilting the unit to the right or left
±10°
Avoid tilting the projector more than ± 10 degrees, and avoid installing it in place other than a floor. Doing so may cause color shading or shorten the lamp life excessively.
Blocking the ventilation holes
Installation
Using the Carrying Handles
Use the front and rear carrying handles to carry the projector.
Caution
To avoid injury, have at least four people carry the projector using the front and rear handles.
Using the Adjusters
Avoid using a
For the locations of the ventilation holes (exhaust/intake), see “Location and Function of Controls” on page 8.
When the projector installation location is not horizontal, rotate the adjusters using a spanner so that the projector is placed horizontally. There are an adjuster on the right and one on the left.
Spanner |
GB 14
Installation
