About the items that cannot be adjusted

Items that cannot be adjusted depending on the input signal are not displayed in the window.

For details, see “Input Signals And Adjustable/Setting Items” on page 30.

PICTURE CONTROL Window

The PICTURE CONTROL window is used to select the input source or to adjust the picture quality.

When the screen mode is set to “dual screen” or “quad screen,” the items can be independently adjusted for each input channel displayed on the screen.

Chapter 4 Adjustments and Settings Using the SRX Controller

Input Source

Signal Mode: Click to select the type of signal from the drop-down list when a high-definition signal is input from equipment connected to the optional LKRI-001 input board. Select “YPbPr” to input the high-definition signal from component equipment, and “RGB” to input the high-definition signal from video GBR equipment.

I/P Mode: Selects the I/P conversion mode. Depending on the input signal source, set the mode to “Interlace” or “PsF.”

Signal Info (Information)

Shows the horizontal and vertical frequencies of the input signal automatically. The values are approximate.

The type of the input signal is also displayed.

fH: Displays the horizontal frequency.

fV: Displays the vertical frequency.

GB 26

PICTURE CONTROL Window

Page 26
Image 26
Sony SRX- R110 Picture Control Window, Input Source, Signal Info Information, About the items that cannot be adjusted