Sony SRX-R105, SRX- R110 29 GB, Auto Lamp Select Mode, Manual Lamp Select Mode

INSTALLATION

Selects how to install the projector.

Front: Selects front projection.

Rear: Selects rear projection.

LAMP SELECT

Selects whether to use one of two lamps or both lamps.

Dual: Select if you want to use two lamps.

Single: Select if you want to use only one of two lamps. In this setting, you can further select the lamp to be used automatically or manually.

Auto Lamp Select Mode

When you click the Full Auto Select radio button, the lamp with fewer used hours is automatically turned on. When you use the projector for a long period of time, click the User-Defined radio button. If you specify the hour between 4 and 24 hours by clicking

the / buttons, the two lamps turn on alternately at the interval of the specified hours.

Manual Lamp Select Mode

You can specify the lamp to be used by clicking the Lamp A or Lamp B radio button.

Note

If you switch “LAMP SELECT” from “Single” to “Dual” or when either Lamp A or Lamp B switches to turn on in Auto Lamp Select Mode, the projected image will be cut off momentarily.

TEST PATTERN

Displays a built-in test pattern on the screen for adjusting the picture with no signal input from external equipment. Click the radio button of the desired test pattern from among “Cross Hatch,” “Cross Hatch (Invert),” “100% White,” “100% Red,” “100% Green,” “100% Blue,” “Checker Flag” and “Checker Flag (Invert).” When you do not display a built-in test pattern, click the Off radio button.

Note

While a built-in test pattern is displayed on the screen, you cannot change the screen mode and input select mode, and cannot adjust the “PICTURE CONTROL” and “COLOR FRAME.”

Chapter 4 Adjustments and Settings Using the SRX Controller

INSTALLATION Window

29 GB