Caution
Do not turn the spanner forcibly when the screw has fully rotated. Otherwise, the spanner may slip and injure your hand.
Installing the Projector
This section describes briefly how to install the projector on the floor. The distance between the center of the lens and the screen varies depending on the optional lens attached, the horizontal screen size or the input signal.
For details on installation examples with projection distances, see “Installation Manual for Dealers”.
Screen
320 mm (12 5/8 inches)
Projection distance
Vertical positioning (side view)
Install the projector so that the center of the lens is between the bottom edge and the top edge of the screen. You can move the picture position vertically by half of the screen vertical size using the lens shift adjustment.
For details on the lens shift adjustment, see page 30.
| Adjustable range with lens |
Center of lens | shift feature |
Screen
Horizontal positioning (top view)
Install the projector so that the center of the lens is aligned horizontally with the center of the screen.
Screen
Center of lens
Installing the SRX Controller in a Computer for Controlling the Projector
If you install the supplied SRX Controller in a computer, you can control the projector from the computer.
System Requirements
The following are required to operate the supplied SRX Controller.
•Computer: Intel Pentium M 1.6GHz or higher, and a recommended CPU in your Operating System
–Installed memory: 256 MB or more (512 MB or more recommended), and recommended memory in your Operating System
–Communication: LAN
–VGA: XGA (1024 × 768) or higher
–HDD: Connected to a computer via the IDE port, Usable memory with 15 MB or more
–
•Operating System: Microsoft Windows XP Professional SP2 (English or Japanese version) (excluding ×64 Edition)
Intel and Pentium are registered trademarks of Intel Corporation in the United States and other countries.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and other countries.
Installing the SRX Controller
1 Insert the supplied installation disc into the
The setup.exe in the root folder of the installation disc starts, and the window for preparing the installation appears.
Preparations 2 Chapter
Installing the SRX Controller in a Computer for Controlling the Projector | 15 |
|
|