FeaturesHigh Brightness, High Picture Quality

High brightness

The SRX-T110 uses two 2 kW Xenon lamps as a light source, and the SRX-T105 uses two 1 kW Xenon lamps. These compact-size Xenon lamps provide high brightness of 11,000 lumens for the SRX-T110 and 5,500 lumens for the SRX-T105, assuring excellent uniformity on the entire screen.

High resolution

Sony’s new, unique three SXRD™ (Silicon X-tal Reflective Display) panels with about 8,850,000 pixels realizes a high-resolution of 4096 × 2160 dots. The resolution corresponds to four times that of an HDTV image.

Multi-screen mode

The high resolution of the projector enables single-, dual- and quad-mode projection in which full HD images can be displayed even in each of two or four divided screens.

Images from different input sources can be displayed in these divided screens simultaneously.

High contrast ratio

The combination of the SXRD imaging devices and 3PBS optical devices offers a high contrast ratio of 2500:1.

Gamma correction circuit

You can select a gamma value from 1.80 to 2.59 in 0.01 steps according to the signal input. (The values of 2.2 and

2.6are fixed.) This allows projection of an image with optimum brightness. (Only three types of gamma correction circuit, 1.8, 2.2 and 2.6, may be selectable according to the optional input board.)

Color space feature

The projector supports four standards of color tonal reproduction range, sRGB(ITU-R BT.709), DCDM, Adobe RGB and CIE XYZ, allowing you to obtain an image with precise color reproduction according to the input sources.

Squeeze function

A squeezed signal with a 4:3 aspect ratio is stretched horizontally to fit a 16:9 screen, and a signal with a 16:9 aspect ratio is stretched horizontally to fit a 2.39:1 screen. This function is available only for projection in single- screen mode and may not work depending on the signal type input.

Flexible and Reliable System

Dual lamp system

The projector adopts a dual lamp system for versatility of use. You can select dual-lamp or single-lamp mode, and can reduce each lamp’s power output. These modes allow you to save power and increase lamp life.

Also, if one bulb burns out, the other keeps projecting images.

Versatile Setup

Various signal input

The projector is equipped with an RS232C connector and ETHERNET connector for communication. For signal inputs, the projector has four slots to which the optional analog input boards, HD-SDI input boards and DVI-D interface boards can be attached according to your requirement.

Optional lens

Optional zoom lenses are available depending on the projection distance you are setting up. The lens shift function of this projector enables easy setup.

When the optional zoom lens equipped with zoom/focus memory function is installed, you can register the zoom and focus settings adjusted to fit the desired screen size. Registration of the settings adjusted for screen sizes of aspect ratio of 4:3 and 16:9 allows you to switch between them easily with the buttons in the window of the SRX Controller.

Overview 1 Chapter

Features 7