Preparations 2 Chapter

Unsuitable Conditions

Do not use the projector under the following conditions.

Laying the unit on its side or upside down

Tilting the unit to the right or left

±10°

Avoid tilting the projector more than ± 10 degrees. Doing so may cause color shading or shorten the lamp life excessively.

Blocking the ventilation holes

Avoid using a thick-piled carpet or anything that covers the ventilation holes (exhaust/intake). Otherwise, internal heat may build up.

For the locations of the ventilation holes (exhaust/intake), see “Location and Function of Controls” on page 8.

Installation

Using the Carrying Handles

Use the front and rear carrying handles to carry the projector.

Caution

To avoid injury, have at least four people carry the projector using the front and rear handles.

Using the Adjusters

When the projector installation location is not horizontal, rotate the adjusters using a spanner so that the projector is placed horizontally. There are an adjuster on the right and one on the left.

Spanner

14 Installation