Installation of the SRX Controller is completed. To restart the SRX Controller immediately after installation has been completed, click to check “Launch SRX Controller for SRX-T series”, then click “Finish”.

The icon is displayed in the desktop window.

Connecting a Computer for Controlling the Projector

Connect a computer for controlling the projector to the projector via the ETHERNET connector or the RS232C connector.

Connecting the Computer via the Ethernet

Connect the computer to the projector using the supplied ethernet cable (cross cable).

Note

Set the TCP/IP protocol of the connected computer to DHCP.

Preparations 2 Chapter

DVI-DAUX

INTER LOCK ETHERNET

RS232C

ETHERNET connector

Ethernet cable (cross cable) (supplied)

Computer

Ethernet connector

Connecting a Computer for Controlling the Projector

17