Preparations

Precautions onInstallation
Unsuitable Installation

Do not install the projector in the following situations. Such installations may cause a malfunction or damage to the projector.

Poorly ventilated

Chapter2

activating the protection circuit. Be sure not to block the ventilation holes for exhaust. Leave a space of more than 1 m (39 3/8 inches) around the unit.

Extremely hot and humid

Preparations 2 Chapter

Location subject to sudden change of temperature

The projector is equipped with ventilation holes for intake and exhaust to prevent internal heat build-up. Do not place the projector in a place where the ventilation holes may be blocked.

Situation that may block the ventilation holes for exhaust

If you put something beside the ventilation holes for exhaust on the side or rear of the projector, the exhaust may be inhaled into the projector through the ventilation holes for intake, causing internal heat build-up and thereby

A sudden change of temperature may produce moisture condensation, causing damage to the projector. Take care with heaters or air-conditioners.

Very dusty

Precautions on Installation

13