Note

Select “RGB” in “Signal Mode” of “Input Source” in the PICTURE CONTROL window.

For details, see page 27.

Connecting with HD-SDI Equipment

Attach the optional LKRI-002 HD-SDI (4:2:2) or LKRI- 003 HD-SDI (4:4:4) input board to the input board attachment part, and connect the HDCAM recorder/player. The illustration below shows an example with the LKRI- 002 attached on INPUT B.

Left side

DVI-DAUX

IN OUT

INTER LOCK ETHERNET

RS232C

IN connector

HD-SDI connecting cable (not supplied)

to HD-SDI output

HDCAM recorder/player, etc.

Note

When the LKRI-003 is attached to the projector, select the type of signal with “Signal Mode” of “Input Source” in the PICTURE CONTROL window. For Single-link input, select “YPbPr” or “YPbPr FULL”. For Dual-link input, select “RGB” or “RGB FULL”.

For details, see page 27.

Connecting with Component/Video GBR Equipment

Attach the optional LKRI-001 analog input board to the input board attachment part on the projector, and connect with a DVD recorder/player or analog video equipment equipped with the component output, or an high-definition equipment equipped with a video GBR connector.

Left side

DVI-DAUX

r)

b) HD

VD

INTER LOCK ETHERNET

RS232C

R/Pr / G/Y / B/Pb connectors

Component cable, etc (not supplied)

to component output/ video GBR

Betacam, DVD recorder/player, etc.

Note

When connecting to the output of HD component equipment, set “Signal Mode” of “Input Source” in the PICTURE CONTROL window to “YPbPr”, and when connecting to the output of HD video GBR equipment, set to “RGB”.

For details, see page 27.

Preparations 2 Chapter

Connecting the Projector

21