Overview 1 Chapter

Select the input signal with one of the INPUT SEL A/B/C/ D buttons (5), then select the screen with one of these buttons.

Example: When you want to project the signal input from the INPUT B board on Screen 3 (lower left screen), press the INPUT SEL B button, then press the SCREEN SEL 3 button.

hLENS CONT (Lens control) buttons FOCUS +/–:Adjust the focus. Pressing the + button

focuses on a picture further back. Pressing the – button focuses on a forward picture.

ZOOM +/–:Adjust the picture size. Pressing the + button enlarges the picture size. Pressing the – button reduces the picture size.

SHIFT +/–:Adjust the vertical picture position. Pressing the + button moves the picture upward. Pressing the – button moves the picture downward.

To install batteries

1 Remove the lid, then install the two size AA (R6) batteries (supplied) with the correct polarity.

Push the knob to open

Be sure to install the battery

the lid.

from the – side.

2 Replace the lid.

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.

When you dispose of the battery, you must obey the law in the relative area or country.

12 Location and Function of Controls