About the Program Launcher screen
132
aMenu bar
File
Select “Quit” from the “File” menu to exit the SRX Controller.
Connect
Selects the connection mode between the projector and the computer for controlling the projector.
For details, see “Changing the Connection Mode” on page 19.
Help
Select “Version” from the “Help” menu to display the version information of the SRX Controller.
bProjector detect window
Information on all of the projectors connected to a network is displayed.
The following information is shown:
Alert: Shows whether there is any warning information on the projector or not. ( : Yes, : No)
Model Name: Model name of the projector
Serial No.: Serial number of the projector
IP Address: IP address of the projector
Connection: Network connection status of the projector The projectors that can be selected with the Select button are indicated by “Connectable” under “Connection”.
Power: Power on/off status of the projector
Region: Region where the projector is installed
Location: Installation location of the projector
Name: Free name
To exit the SRX Controller
Click “Quit” from the “File” menu on the menu bar.
Changing the Connection Mode
When the projector you want to operate is connected to the computer via a network, you can select it by specifying the IP address of the projector. Connection via the
When connecting the computer via a network by specifying the IP address of the projector
Select “Network” from the “Connect” menu on the menu bar to open the dialog. Enter the IP address and model name of the projector, then click “OK”.
To change the port number, select “PC Port Setting” from the “Connect” menu on the menu bar to display the dialog. Enter the new port number in the dialog and click “OK”.
When connecting the computer via
Preparations 2 Chapter
Starting the SRX Controller 19