Adjustments using the

SET UP button

The SET UP button allows you to make the following adjustments.

1 Press SET UP.

2 Press the cursor buttons ( or ) to select the parameter you want to adjust.

3 Turn the jog dial to select the setting you want.

The setting is entered automatically.

4 Repeat steps 2 and 3 until you have set all of the parameters that follow.

Initial settings

Parameter

Initial setting

6.1CH DECODING

AUTO

 

 

MULTI CH 1 or 2

NONE

 

 

D.POWER

AUTO OFF

 

 

V.POWER

AUTO OFF

 

 

S.FIELD LINK

ON

 

 

DECODE FORMAT

AUTO

 

 

AUTO FUNCTION

ON

 

 

2ND ROOM SP1)

ON

3RD ROOM SP2)

ON

2 WAY REMOTE3)

ON

COMMAND MODE

AV1

 

 

T.TONE

NORMAL

 

 

OSD

COLOR

 

 

OSD H.POSITION

4

 

 

OSD V.POSITION

4

 

 

1)When the SPEAKER switch is set to “MAIN+2ND ROOM” only. (STR-DA3ES only)

2)When the SPEAKER switch is set to “MAIN+3RD ROOM” only. (STR-DA5ES only)

3)STR-DA5ES only.

x6.1ch decoding mode (6.1CH

DECODING)

You can set this parameter using 6.1CH DECODING on the front panel (page 34).

•When set to “AUTO”, the receiver performs

6.1channel decoding only if 6.1 channel signals decode flag is ON.

•When set to “ON”, the receiver performs

6.1channel decoding only if the surround signals are multi channel format [3/2], [3/2+1] or [3/3], regardless of the 6.1 channel decode flag.

•When set to “OFF”, the receiver does not perform 6.1 channel decoding.

Tip

The 6.1 channel decoding flag is the information recorded on the software (DVD, etc).

xMulti channel assignment (MULTI CH 1 or 2)

Lets you assign a function to MULTI CH 1 or 2. You cannot assign TUNER or PHONO.

You cannot assign the same function to both MULTI CH 1 and 2.

48