1 Press SET UP.
The set up list appears.
pRECEIVER IR SET LEARNING DOWNLOAD
2 Move the easy scroll key to select “IR SET”, then press the key to enter the selection.
The IR SET list appears.
<IR SET> [VIDEO 1 ]
p[VIDEO 2 ] [VIDEO 3 ]
3 Move the easy scroll key to select the component (“VIDEO 2”, for example), then press the key to enter the selection.
The category list appears.
Category?
pVCR T V L D
4 Move the easy scroll key to select the category (i.e., the component that is actually connected to the corresponding jacks; in this case, “LD”), then press the key to enter the selection.
The maker list appears.
Maker?
Sony
DENON
pKenwood
5 Move the easy scroll key to select the maker of the component (“Kenwood”, for example), then press the key to enter the selection.
When programming the remote to control Sony component
Select “Sony.”
Programming is now completed.
To cancel programming
Move the easy scroll key to select “Exit” or “Cancel” during any step, then press the key to enter the selection.
Tip
You can freely assign any component to USER 1 and 2 items in the IR SET list
1 Do steps 1 and 2 in “Programming the Remote”.
2 Move the easy scroll key to select “USER 1” or “USER 2,” then press the key to enter the selection.
3 Continue from step 3 in “Programming the Remote” to select the category and maker of the component.
Note
If you select “IR SET” for a component that already has a learned button setting, the learned codes for that component are cleared. Furthermore, if the cleared learned button is used in a Macro Play setting, the setting for that button will be changed to “NO SET”.
Performing several commands in sequence automatically (Macro Play)
The Macro Play function lets you link several IR codes in a sequential order as a single command. The remote provides 2 macro lists (MACRO 1 and 2). You can specify up to 16 IR codes for each macro list.
Setting the sequence of IR codes
1 Press SET UP.
The set up list appears.
pRECEIVER IR SET LEARNING DOWNLOAD
2 Move the easy scroll key to select “IR SET”, then press the key to enter the selection.
The IR SET list appears.
<IR SET>
pMACRO1
MACRO2 Exit
continued
using Operations remote the
65