To erase a programmed IR code

1In step 4, move the easy scroll key to select “Common”, then press the key to enter selection.

2Move the easy scroll key to select “NO SET”, then press the key to enter selection.

To turn off all Sony components

(SYSTEM STANDBY)

1In step 4, move the easy scroll key to select “Common”, then press the key to enter selection.

2Move the easy scroll key to select “ALL OFF”, then press the key to enter selection.

However, this function cannot be applied to some Sony components.

To cancel programming

Move the easy scroll key to select “Exit” or “Cancel” during any step, then press the key to enter the selection.

Tips

•In step 6, when “*” is displayed in front of the function, the function is pre-programmed.

•In step 3 and 7, when “NO SET” is displayed after the program number, the codes have not been programmed.

Note

If you select “IR SET” for a component that already has a learned button setting, the learned codes for that component are cleared. Furthermore, if the cleared learned button is used in a Macro Play setting, the setting for that button will be changed to “NO SET”.

Starting macro play

1 Press FUNCTION.

The function list appears.

DVD/LD

pTV/SAT TAPE MD/DAT

2 Move the easy scroll key to select “MACRO1” or “MACRO2”, then press the key to enter the selection.

The IR codes appear in the display window as they are performed.

Notes

•Pressing any of the following buttons during a macro play operation will cancel the macro play sequence before it is complete.

–AV ?/1

–?/1

–SYSTEM STANDBY

–SOUND FIELD

–FUNCTION

–SET UP

•When the Macro Play function does not work properly, set “WAIT TIME” between each operation.

continued

using Operations remote the

67