Using the RM-US105 remote (continued)

To set to the 2nd room mode

1 Press USE MODE.

The current remote mode button slowly lights up 5 times.

2 Press 2ND ROOM while the button blinks.

The command mode has been set to the 2nd room mode.

To change the button assignments for the 2nd room mode

When the remote is set to the 2nd room mode, you can set the remote to turn on/off the receiver or adjust the volume.

You can assign the following buttons:

?/1, MUTING, MASTER VOL +, MASTER VOL –

Example: To set the command mode of above 4 buttons to “AV SYSTEM 1” while in the 2nd room mode.

1 Press USE MODE more than 2 seconds.

The indicator remains lit.

2 Press 2ND ROOM.

3 Press AV SYSTEM 1.

4 Press SOURCE.

The indicator slowly lights up twice, then goes off.

For the above 4 buttons, the signals for AV SYSTEM 1 are output even in the 2nd room mode. Besides, you can operate the receiver whose command mode is “AV SYSTEM 1”.

To set to the 3rd room mode

1 Press USE MODE.

The current remote mode button slowly lights up 5 times.

2 Press 3RD ROOM while the button blinks.

The command mode has been set to the 3rd room mode.

Buttons that can be used in the 3rd room mode

Button(s)

Function

?/1

Turns on/off the sound output

 

from the SPEAKERS 3RD

 

ROOM jacks.

 

 

Function buttons

Switch the source output from

 

the SPEAKERS 3RD ROOM

 

jacks.

 

 

MUTING

Mutes the sound.

MASTER VOL +/– Adjusts the volume.

80