w; SHIFT >10 button

If you have selected tuner:

Press repeatedly to select a memory page for presetting radio stations or tuning to preset stations.

If you selected VCR, TV, tape deck, LD player, video CD player, MD deck, or CD player:

Press before inputting a channel, disc, or track number of eleven or higher. For details, refer to the operation manual supplied with the respective components.

wa Numeric buttons (1 to 0)

Inputs the correponding numeric value. On some components, pressing 0 selects 10. For details, refer to the operation manual supplied with the respective components.

ws SUB button

While operating a component, press to display a list of operations that the corresponding buttons are not found on the remote. Then move the easy scroll key to select the operation, and then press the key to enter the selection. Press again to revert back to the component information.

See the table on pages 59–60 for information on the operations that appear when you press SUB.

wd AV MENU button

When you have selected the VCR, DVD player, or SAT tuner, press this button to display VCR, DVD, or SAT menu on the TV screen. Then use the cursor buttons to perform the menu operations (see “qk Cursor buttons (V/v/B/b),” “ENTER/ EXECUTE button,” and “EXIT/RETURN button”).

Note

When you have selected VCR, the remote is set to control the VCR that corresponds with VCR 1 after you press AV MENU. Before pressing the button, make sure to set the VCR input mode to VCR 1.

wfMUTING button

The function of this button is same as the MUTING button on the receiver. See page 27.

wg6.1CH DECODING button

The function of this button is same as the 6.1CH DECODING button on the receiver. See page 34.

whSOUND FIELD button

Press to display the sound field list. Press again to revert back to the component information.

wjAV ?/1 switch

Press to turn on or off the components that the remote is programmed to operate. For details on programming procedure, see “Programming the Remote” on page 64. If you press the ?/1switch (2) at the same time, it will turn off the main component and other Sony audio/video components (SYSTEM STANDBY).

Note

The function of the AV ?/1 switch changes automatically each time you press FUNCTION (4). Depending on the component, the above operation may not be possible or may operate differently than described.

continued

using Operations remote the

57