Switching the COMMAND MODE
You can switch the command mode (AV SYSTEM1 or AV SYSTEM2) of the remote. If the command mode of the receiver and the remote is different, you cannot use the remote to operate the receiver.
1 Press SET UP.
The set up list appears.
AUTO POWER BACK LIGHT CONTRAST
pCOMMAND MODE
2 Move the easy scroll key to select “COMMAND MODE”, then press the key to enter the selection.
The COMMAND MODE list appears.
<COMMAND MODE> pAV SYSTEM1
AV SYSTEM2 3RD ROOM
3 Move the easy scroll key to select “AV SYSTEM1” or “AV SYSTEM2”, then press the key to enter the selection.
Tip
When the remote is turned on, the COMMAND MODE appears in the first line of the display.
Setting to the 3rd room mode
You can use the remote to select the function for the 3rd room and adjust the volume in the 3rd room (3rd room mode).
1 Press SET UP.
The set up list appears.
AUTO POWER BACK LIGHT CONTRAST
pCOMMAND MODE
2 Move the easy scroll key to select “COMMAND MODE”, then press the key to enter the selection.
The COMMAND MODE list appears.
<COMMAND MODE>
AV SYSTEM1
AV SYSTEM2 p3RD ROOM
3 Move the easy scroll key to select “3RD ROOM”, then press the key to enter the selection.
The 3RD ROOM list appears.
<3RD ROOM>
pOK
SET UP Cancel
4 Move the easy scroll key to select “OK”, then press the key to enter the selection.
continued
using Operations remote the
73