Using the lists (continued)

To operate the tuner of the receiver in the main room

To operate the tuner built in the receiver in the main room in the 3rd room mode, select the same command mode of the receiver in the SERVER list.

1Do steps 1 to 3 in “Setting to the 3rd room mode”.

2Move the easy scroll key to select “SET UP”, then press the key to enter the selection.

The 3-SET UP list appears.

3Move the easy scroll key to select “SERVER”, then press the key to enter the selection.

The SERVER list appears.

4Move the easy scroll key to select “AV SYSTEM1” or “AV SYSTEM2”, then press the key to enter the selection.

Clearing all the contents of remote’s memory

Be sure to turn on the receiver and point the remote towards the receiver when performing the following procedure.

1 Press SET UP.

The set up list appears.

BACK LIGHT CONTRAST COMMAND MODE

pALL CLEAR

2 Move the easy scroll key to select “ALL CLEAR”, then press the key to enter the selection.

The ALL CLEAR list appears.

<ALL CLEAR?> Yes

pNo

3 Move the easy scroll key to select “Yes”, then press the key to enter the selection.

“CLEAR OK?!” appears.

<CLEAR OK?!> Yes

pNo

4 Move the easy scroll key to select “Yes” again, then press the key.

All the contents of the remote’s memory (i.e., all the programmed data) are cleared.

74