Notes

•Sound adjustments do not affect the signal output from the MD/TAPE OUT jacks.

•The audio input signals from the MULTI CHANNEL INPUT jacks are not output.

To record digital sound

Connect a component for playback to the digital audio input (OPTICAL IN) jack, and connect the recording component to the OPTICAL MD/TAPE OUT jack.

Recording onto recording media

1 Press the input button of the playback component.

2 Prepare the component for playing.

For example, insert the video tape you want to copy into the VCR.

3 Prepare the recording component.

Insert a blank video tape, etc., into the recording component (VIDEO 1 or VIDEO 2) for recording.

4 Start recording on the recording component, then start playback on the playback component.

Notes

•Some sources contain copy guards to prevent recording. In this case, you may not be able to record from the sources.

•The audio input signals from the MULTI CHANNEL INPUT jacks are not output.

•Only analog input signals are output from the analog output jack (for recording).

•Only digital input signals are output from the digital output jack (for recording).

•HDMI sound cannot be recorded.

Using a bi-amplifier connection

If you are not using surround back speakers, you can use the SURROUND BACK SPEAKERS terminals for the front speakers for use with a bi-amplifier connection.

To connect speakers

Front speaker

Front speaker

(R)

(L)

Hi

Hi

Lo

Lo

Connect the jacks on the Lo (or Hi) side of the front speakers to the FRONT SPEAKERS A jacks, and connect the jacks on the Hi (or Lo) side of the front speakers to the SURROUND BACK SPEAKERS terminals. Make sure that metal fittings of Hi/Lo attached to the speakers have been removed from the speakers. Not doing so may cause a malfunction of the receiver.

To set up speakers

Set “Sur Back Assign” to “BI-AMP” in the Speaker settings menu. The same signals output from the FRONT SPEAKERS A jacks can be output from the SURROUND BACK SPEAKERS terminals by setting “Sur Back Assign” to “BI-AMP.”

104GB