Enjoying Surround Sound

Enjoying a preprogrammed sound field

2

3-6

1 Start playing a sound source you want to listen to (CD, DVD, etc.).

2 Make sure that the AMP button is lit.

If it is not lit, or “GUI MODE” is not displayed in the display window of the receiver, follow the steps given in “7: Operating the receiver using the GUI (Graphical User Interface)” (page 38).

3 Press V/v repeatedly to select “Settings,” then press or b.

The Settings menu list appears on the TV screen.

4 Press V/v repeatedly to select “Surround,” then press or b.

5 Press V/v repeatedly to select “Sound Field Setup,” then press .

6 Press V/v repeatedly to select the surround sound you want.

 

Enjoying

Parameter that allows custom settings

Surround

 

provides a “Custom Settings” menu that

 

can be used to make advanced

 

adjustments. For details, see “Adjusting

Sound

the sound effect” (page 66).

 

Types of 2CH mode

x2ch Stereo

The receiver outputs the sound from the front left/right speakers only. There is no sound from the sub woofer.

Standard 2 channel stereo sources completely bypass the sound field processing and multi- channel surround formats are downmixed to 2 channel.

Note

No sound is output from the sub woofer in the 2ch Stereo mode. To listen to 2 channel stereo sources using the front left/right speakers and a sub woofer, select “A.F.D. Auto.”

This receiver will generate a low frequency signal for output to the sub woofer when there is no L.F.E. signal, which is a low-pass sound effect output from a sub woofer to a 2 channel signal.

continued

59GB