Selecting an operation screen to operate the component connected to the DIGITAL MEDIA PORT adapter
You can select an operation screen using the GUI menu, depending on the DIGITAL MEDIA PORT adapter you want to use. For some adapter, such as
1
3,
4,6
5
2
1 Make sure that the AMP button is lit.
If it is not lit, or “GUI MODE” is not displayed in the display window of the receiver, follow the steps given in “7: Operating the receiver using the GUI (Graphical User Interface)” (page 38).
2 Press MENU repeatedly to display the GUI menu on the TV screen.
3 Press V/v repeatedly to select “Music,” then press or b.
“DMPORT” appears beside “Music.”
4 Press or b.
The component connected to the DIGITAL MEDIA PORT adapter is recognized and “DMPORT” on the screen will change to each component’s name. The category of the component connected to DIGITAL MEDIA PORT adapter appears on the screen.
Note
An icon which shows the component recognized is displayed on the TV screen. If the adapter connected cannot be recognized, “DMPORT” is displayed on the TV screen.
5 Press OPTIONS to display “Function List.”
6 Press V/v to select “DMPORT
Control.”
You can select the following modes in this menu;
•System GUI
This mode is for the
•Adapter GUI
This mode is for the
•iPod
This mode can be selected only when the
If “DMPORT Control” is not displayed, see the operating instructions supplied with component for details on operating that component.
92GB