This receiver is equipped with a function for converting video signals. You can output the video signal after connecting this receiver via the MONITOR VIDEO OUT jack as shown in the illustration.
•Video signals can be output as HDMI video and component video signals.
•Component video signals can be output as HDMI video and video signals.
For details on the video converting function, see “In the video input/output conversion table classified by the menu settings” (page 34).
Input Signals
AB C
|
|
| Output Signals | |
|
|
| BC | |
|
|
| ABC | |
|
|
| BC | |
OUTPUT jack | HDMI OUT | COMPONENT VIDEO | MONITOR VIDEO OUT | |
INPUT jack | MONITOR OUT | |||
|
| |||
HDMI IN 1/2/3 A | f | X | X | |
VIDEO IN B | a | a | a/f* | |
COMPONENT | a | a/f | a | |
VIDEO IN C | ||||
|
|
|
a: Video signals are converted and output through the video converter.
f: The same type of signal as that of the input signal is output. Video signals are not converted. X : Video signals are not output.
* Video signals are output when “Resolution” is set to “DIRECT” in the Video settings menu.
32GB