Adjusting the sound effect

Parameter that allows custom settings provides a “Custom Settings” menu that can be used to make advanced adjustments.

2-3

3 While monitoring the sound, adjust the selected parameter using V/v and .

For details, see following menu parameters.

Note

The setup items you can adjust on each menu vary depending on the sound field.

To adjust the effect level

1Press V/v repeatedly to select the effect level, then press in step 2.

2Press V/v repeatedly to adjust the

level.

Higher settings apply more surround effect. You can adjust the level from 20% to 120% in 5% steps.

1 Choose the sound field (page 59).

2 Press b to select “Custom

Settings,” then press .

Custom Settings menu parameter

xCenter Width Control

Lets you perform further adjustments for Dolby Pro Logic II and IIx Music mode decoding. You can set this parameter only when A.F.D. mode is set to “PLII Music” or “PLIIx Music.”

You can adjust the distribution of the center channel signal, generated through the Dolby Pro Logic II decoding, to the left/right speakers.

66GB