You can preset up to 30 FM and 30 AM stations. Then you can easily tune in the stations you often listen to.
1
2,
4
1 Make sure that the AMP button is lit.
If it is not lit, or “GUI MODE” is not displayed in the display window of the receiver, follow the steps given in “7: Operating the receiver using the GUI (Graphical User Interface)” (page 38).
2 Press V/v repeatedly to select “FM” or “AM,” then press or b.
3 Tune in the station that you want to preset using Automatic Tuning (page 79) or Direct Tuning (page 80).
In case of poor FM stereo reception, switch the FM reception mode (page 79).
4 Press OPTIONS.
5 Press V/v to select “Memory,” then press to enter.
6 Press V/v to select a preset number.
7 Press .
The station is stored as the selected preset number.
8 Repeat steps 3 to 7 to preset another station.
To tune to preset stations1Repeat steps 1 and 2 of “Presetting radio stations.”
2Press V/v to select the preset station
you want.
You can select a preset station as follows:
•AM band AM1 to AM30
•FM band FM1 to FM30
To name preset stations1Select a preset station you want to name.
2Press OPTIONS, then select “Name
Input.”
For details on naming operations, refer to “Naming inputs” (page 95).
Operations Tuner
81GB