2Press CLEAR.

3Press 1 or 2 while the RM SET UP

button is flashing.

When you press 1, the command mode is set to AV SYSTEM 1. When you press 2, the command mode is set to AV SYSTEM 2.

4Press ENTER when the RM SET UP

button lights up.

The RM SET UP button flashes twice, then the command mode setting process is completed.

Tip

When you press RM SET UP, use a thin wire, such as a paper clip.

7:Operating the receiverusing the GUI (Graphical UserInterface)

By using the GUI menu, you can make various settings and adjustments.

Displaying the GUI menu on the TV screen

2

4

3

AMP

MENU

5

4

1 Connect a TV monitor to this receiver.

Refer to “3: Connecting the monitor” (page 18).

2 Turn on the receiver and the TV.

3 Press AMP to enable receiver operation.

38GB