8: Setting the speakersSetting the speaker impedances

Set the appropriate speaker impedance for the speakers you are using.

1

2-5

1 Make sure that the AMP button is lit.

If it is not lit, or “GUI MODE” is not displayed in the display window of the receiver, follow the steps given in “7: Operating the receiver using the GUI (Graphical User Interface)” (page 38).

2 Press V/v repeatedly to select “Settings,” then press or b.

The Settings menu list appears on the TV screen.

3 Press V/v repeatedly to select “Speaker,” then press or b.

Started Getting

4 Press V/v repeatedly to select “Impedance,” then press .

5 Press V/v repeatedly to select “4 Ω” or “8 Ω” depending on the speakers you are using, then press .

Notes

•If you are not sure of the impedances of the speakers, refer to the operating instructions supplied with your speakers. (This information is often on the back of the speaker.)

•When you connect all speakers with a normal impedance of 8 ohms or higher, set “Impedance” to “8 Ω.” When connecting other types of speakers, set it to “4 Ω.”

•When you connect front speakers to both the SPEAKERS A and B terminals, connect the speakers with a normal impedance of 8 ohms or higher.

continued

41GB