connected to the receiver. The
Note
Audio signals are not output from the TV’s speakers when HDMI Audio is set to “AMP.”
xHDMI SW Level
Lets you set the level of the sub woofer to 0 dB or +10 dB when PCM signals are input via an HDMI connection. You can set the level for each HDMI input independently.
•0 dB
•AUTO
Automatically sets the level to 0 dB or +10 dB depending on the frequency.
•+10 dB
You can use the System settings menu to customize the settings of the receiver. Select “System” in the Settings menus. For details on adjusting the parameters, see “7: Operating the receiver using the GUI (Graphical User Interface)” (page 38).
System settings menu parametersxScreen Saver
Lets you activate the screen saver function for the GUI menu on the TV connected to the receiver.
•ON
When there has been no operation attempted for 15 minutes, the screen saver function is activated automatically.
•OFF
The screen saver function is disabled.
58GB