2 Press V/v repeatedly to select “Settings,” then press or b.

The Settings menu list appears on the TV screen.

3 Press V/v repeatedly to select “Auto Calibration,” then press or b.

4

Press V/v repeatedly to select

9 Measurement starts.

 

“Quick Setup,” then press .

The measurement process will take

5

 

 

Press V/v repeatedly and

to

approximately 30 seconds with a test

tone. Wait until the measurement process

 

un-check the items you do not

 

completes.

 

want to measure.

 

 

 

 

Speaker Distance

Speaker Level

Frequency Characteristic

Started Getting

6 Press b.

7 Press to select “Start.”

8 The measurement starts in five seconds.

Note

You cannot measure the speaker height of the surround speakers and the surround back speakers. Set the position of the surround speakers from “Position” in the Speaker settings menu.

Tips

Operations other than turning the receiver on or off are deactivated during the measurement.

When connecting special speakers, such as dipole speakers, the measurements have not been performed correctly or auto calibration cannot be performed.

To cancel the measurement

The measurement is cancelled when you change the volume, switch functions, change the setting of the SPEAKERS switch, or connect headphones.

45GB